Before understanding the troubleshooting and repair of two-phase motors with no resistance, we need to understand the causes. Here are some common causes:

1. Motor winding open circuit or short circuit: The motor winding may be open circuit or short circuit after long-term use, resulting in no resistance in the motor.

2. Motor rotor stuck: The motor rotor may be stuck during use, causing the motor to fail to work properly.

3. Motor power supply circuit failure: Failure of components in the motor power supply circuit may cause the motor to lose resistance.

4. Motor driver failure: Failure of the motor driver during use may also cause the motor to have no resistance.

2. Troubleshooting of two-phase motors with no resistance

When the motor has no resistance, we need to perform a series of troubleshooting to determine the specific cause. Here are some common troubleshooting methods:

1. Check whether the connection of the motor winding is normal: Check whether the connection of the motor winding is open circuit or short circuit to determine whether the motor winding needs to be replaced.

2. Check whether the motor rotor is stuck: Check whether the motor rotor is stuck. If it is stuck, it needs to be cleaned and repaired.

3. Check the components of the motor power supply circuit: Check whether the components in the motor power supply circuit are faulty. If so, they need to be replaced or repaired.

4. Check whether the motor driver is normal: Check whether the motor driver is normal. If it fails, it needs to be replaced or repaired.

III. Repair methods for two-phase motors with no resistance

Once the reason for the motor's lack of resistance is determined, we need to perform corresponding repairs. The following are some common repair methods:

1. Replace the motor winding: If the motor winding is open or short-circuited, the motor winding needs to be replaced.

2. Clean and repair the motor rotor: If the motor rotor is stuck, it needs to be cleaned and repaired to make it run normally.

3. Replace the components in the motor power supply circuit: If the components in the motor power supply circuit fail, they need to be replaced or repaired.

4. Replace the motor driver: If the motor driver fails, it needs to be replaced or repaired.

4. How to avoid the failure of two-phase motor without resistance

In order to avoid the failure of two-phase motor without resistance, we need to take some preventive measures to reduce the occurrence of failures from the source. The following are some common preventive measures:

1. Regularly maintain the motor: regularly maintain the motor, clean and check the various parts of the motor, find problems in time and deal with them.

2. Ensure the stability of the motor power supply circuit: ensure the stability of the motor power supply circuit to avoid failure of components in the power supply circuit.

3. Use a suitable motor driver: select a suitable motor driver to avoid driver failure and affect the normal operation of the motor.

4. Use the motor correctly: use the motor correctly to avoid excessive and improper use, which may cause motor failure.

The two-phase motor has no resistance, which is a common fault. It may affect the normal operation of the motor and even cause motor damage. For the troubleshooting and repair of the two-phase motor without resistance, we need to master certain skills and methods to reduce the occurrence of faults from the source.

Wolong Nanyang Explosion Protection, Flameproof three-phase asynchronous motor, explosion proof motor